- Switched PDU ▸
- PRO2™ HDOT® 11.0kW - 22.0kW (48-54) outlets
PRO2™ HDOT® 11.0kW - 22.0kW (48-54) outlets Rack PDU
The PRO2 hot-swappable network card provides for HTTP(S), SSH, Telnet,SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.
Hot-Swap Network Card
Network access is ensured when power is lost to the Primary unit with backup power provided by the primary Expansion unit.
PRO2 provides the ability to link up to four power circuits using one IP address. First Expansion provides backup power to network card.
Temperature/ Humidity Monitoring
PRO2 Primary and Expansion units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.
Family and Product Details
The Server Technology® PRO2 Smart/Switched POPS PDU provides control of outlet power(Switched only) and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output (POPS only). These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Smart/Switched POPS “Master" PDU can be connected to as many as three (with optional module) PRO2 Smart/Switched POPS “Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.
- Branch Monitoring: Current (A)
- Branch Overcurrent Protection: 10 kAIC (North America) / (5 kAIC ROW)
- Branch Overcurrent Protection Type: Circuit Breaker: 2-pole
- Dual Input: No
- High Retention Outlets: Yes
- Input Current Display: Auto-Orient
- Input Monitoring: PIPS
- Locking Outlets: Yes
- Max Operating Temperature: 60 °C
- Fast Movers: No
- Mounting: 0U Vertical
- Outlet Monitoring: Determined By Outlet Module
- PDU Platform:
- Power Pivot Input: No
- Product Height (inch): 80.0
- Product Height (mm): 2032
- Product Max Depth (inch): 3.0
- Product Max Depth (mm): 77
- Product Nominal Depth (inch): 2.5
- Product Nominal Depth (mm): 64
- Product Width (inch): 2.2
- Product Width (mm): 56
- Product Specifications
★★★ C2W48TE-4PAE2M99 (Switched) Download Datasheet Input Power Capacity (kW): 22.0 Input Plug Type: 230/400V Wye 32A IEC 60309 3P+N+PE 6Hr Input Current (A): 32 Input Current Rated (A): 32 Input Nominal Voltage (V): 400 Input Phase: 3-Phase Wye (L-N) Input Cord Location: Bottom/End Alternating Phase Outlets: true Outlet Form Factor: Total Outlets: 48 IEC C13 Count: 30 Cx Count: 18
★★★ C2W48TE-5CAE2M99 (Switched) Download Datasheet Input Power Capacity (kW): 17.3 Input Plug Type: NEMA L22-30P Input Current (A): 30 Input Current Rated (A): 24 Input Nominal Voltage (V): 415 Input Phase: 3-Phase Wye (L-N) Input Cord Location: Bottom/End Alternating Phase Outlets: true Outlet Form Factor: Total Outlets: 48 IEC C13 Count: 30 Cx Count: 18
Design Diagram - HDOT - DD 412-1083-43
Design Diagram - HDOT Cx - DD 412-1083-43_Cx
★★★ UG - C2S Series Smart PRO2 (PRO1) – User Guide (Firmware Version 8.0) ★★★ UG - C2W Series Switched PRO2 (PRO1) – User Guide (Firmware Version 8.0) ★★★ UG - PRO2 (and PRO1) – User Guide (Firmware Version 8.0)
Application NotesRelated Documents
★★★ AN PRO2-001: How do I maximize uptime using power data from the equipment cabinet? ★★★ AN PRO2-002: How do I use a cabinet PDU to help manage equipment deployment? ★★★ AN SPM-001: How do I leverage cabinet PDU information to help plan for growth?
Have a power strategy expert contact me!
PRO2™ HDOT® 11.0kW - 22.0kW (48-54) outlets
Thank you for your interest in our products
Please fill out this form with your information and we will have an authorized representative in your area contact you within 24 hours.